Mold Release Spray with Wax

Ideal for polyester and epoxy resins, PMMA, and polyurethanes
Volume: 400 ml
Ideal release spray for positives in silicone mold making
Not suitable as a release agent between silicone rubber surfaces

18,49 € inkl. MwSt.

SKU: FTSp-400 Categories: Foundry Supplies, Release Agent, Silicone Mold Making/Accessories Tags: Release Agent Vaseline, Silicone mold

Description

The Mold Release Spray with Wax is your ideal helper for perfect molds. This silicone-free release agent in a practical spray can is perfectly suited for polyester and epoxy resins, PMMA, and polyurethanes, offering excellent release properties. Simply shake well before use and spray thinly and evenly onto the mold surface from a distance of 20-30 cm. For a perfect result, the release film can be wiped off.

Please note that this release spray is not suitable for separating silicone mold halves in multi-part silicone molds. For this purpose, please use release petroleum jelly or release wax. However, it is very well suited as a release agent between the positive and the silicone mold. It forms a thinner release layer, which allows for high detail accuracy during casting. Of course, this only applies if your positive is not also made of silicone.

Our release spray is safe and environmentally friendly. It is silicone-free and free of CFC propellants. The shelf life is approximately 36 months at a storage temperature of 10° C to 30° C.

Storage:
Protect from cold and heat.
Before use, warm cold product to room temperature.
Shake well.
Storage temperature: between 10° C and 30° C

Shelf life: approx. 36 months (unopened original container)

Physico-chemical characteristics: Density at 20° C: 0.645 g/ml DIN 51757

Please check for material compatibility before use!
The release agent is silicone-free!
Aerosol: Active ingredients with propane/butane as propellant.