Offcuts of profiles made from Ms63 (lead-free)

Material: Ms63, CuZn37 (CW508L)
Piece dimensions: 2 to 30 mm in cross-section and up to approx. 100 mm long
Pack weight: min. 1 kg
Melting temperature: 920 °C (liquidus temperature)
Casting temperature: 970–1020 °C
Density: 8.44 g/cm³

34,49 € inkl. MwSt.

Out of stock

EAN: 4255797346237 SKU: Ms63-Versch-1kg Categories: Alloys, Brass Tags: Brass, Ms58, Offcuts

Description

Ms63 offcut pieces, 1 kg weight

Material: Ms63, CuZn37 (CW508L)
Composition: approx. 63% copper and 37% zinc
Piece dimensions: 2 to 30 mm in cross-section and up to approx. 100 mm long
Melting temperature: 920 °C (liquidus temperature)
Casting temperature: 970–1020 °C
Density: 8.44 g/cm³

These are clean offcuts of Ms63 hollow profiles, packed in bags from 1 kg. The material is clean and free of contaminants.

Ms63 is a common brass alloy with 37% zinc and 63% copper content. It is often used to manufacture brass hollow profiles. Unlike Ms58, it is lead-free. It casts well and can be hot-formed well.
An alternative alloy to Ms63 that is also lead-free is Ecobrass CuZn21Si3P (CW724R).

When casting zinc-containing alloys, please note that from a temperature of 907 °C, zinc begins to evaporate from the melt. To prevent the zinc content from dropping significantly, it should be brought quickly to casting temperature (950–1000 °C) and poured.

The moulding sand available in our shops is very well suited as moulding material for brass casting.