• Comprehensive set with everything needed to get started in silicone mold making.
• Contents: Large mold making box, 1 kg Silicone Rubber HB, release spray, release petroleum jelly, measuring cup, and stirring stick
• The silicone rubber is very well suited for tin casting, heat-resistant up to 450°C.
• The set is also suitable for processing other silicone rubbers.
• Free Instructions for Download

The set includes everything you need to get started with silicone rubber mold making. The exact contents are listed below. You can download a free guide on the right under “Additional Information.” This describes how to build a silicone mold using the box. The small mold-making kit contains a 5 cm high mold-making box and 500 g of silicone rubber HB.

Contents:

Large Mold Making Box:
4x aluminum angle sheets, dimensions 10 cm x 20 cm x 10 cm (1 mm wall thickness)
1x aluminum base plate, dimensions 25 cm x 25 cm (2 mm wall thickness)
6x clamps (2 spare)
1x 250g orange Plasticine
1x 1 kg Silicone Rubber HB
1x 1l Measuring Cup
1x Robust Aluminum Stirring Rod 10×10 mm with 300 mm Length
1x Mold Release Spray
1x Release Agent Vaseline

Plasticine: For modeling the positive and partially sealing the mold box
Large Mold Making Box: Sliding angle plates with a stable base plate. Internal dimensions: max. 20×20 cm and 10 cm height
Silicone Rubber HB: Silicone rubber with heat resistance up to 450°C
Mold Release Spray: For treating the positive and applying a thin release layer
Release Agent Vaseline: For separating silicone rubber from each other and treating positives with cracked or porous surfaces
1 l Measuring Cup with Stirring Rod: For mixing the silicone rubber

• Comprehensive set with everything needed to get started in silicone mold making.
• Contents: Small mold making box, 500 g Silicone Rubber HB, release spray, release agent Vaseline, measuring cup, and stirring rod
• The silicone rubber is very well suited for tin casting, heat-resistant up to 450°C.
• The set is also suitable for processing other silicone rubbers.
• Free Instructions for Download

The set includes everything you need to get started with silicone rubber mold making. The exact contents are listed below. You can download a free guide on the right under “Additional Information.” This describes how to build a silicone mold using the box. The large mold making set contains a 10 cm high mold making box and 1 kg of HB silicone rubber.

Contents:

Small Mold Making Box:
4x aluminum angle sheets, dimensions 10 cm x 20 cm x 5 cm (1 mm wall thickness)
1x aluminum base plate, dimensions 25 cm x 25 cm (2 mm wall thickness)
6x clamps (2 spare)
1x 250g orange Plasticine
1x 500 g Silicone Rubber HB
1x 1l Measuring Cup
1x Robust Aluminum Stirring Rod 10×10 mm with 300 mm Length
1x Mold Release Spray
1x Release Agent Vaseline

Plasticine: For modeling the positive and partially sealing the mold box
Small Mold Making Box: Mutually movable angle sheets with a stable base plate. Inner dimensions: max. 20×20 cm and 5 cm height
Silicone Rubber HB: Silicone rubber with heat resistance up to 450°C
Mold Release Spray: For treating the positive and applying a thin release layer
Release Agent Vaseline: For separating silicone rubber from each other and treating positives with cracked or porous surfaces
1 l Measuring Cup with Stirring Rod: For mixing the silicone rubber