Composition: 99.5% Tin and 0.5% Phosphorus
Form: Pellets
Melting point: 232 °C
Density: approx. 7.3 g/cm³

The antioxidation pellets consist of pure tin with a 0.5% phosphorus content. The phosphorus content ensures a reduction of metal oxides in the melt bath and significantly reduces dross formation and suspended particles. This significantly increases metal yield and heat transfer. The phosphorus is consumed bit by bit.

Approximately 1 pellet per kg of solder should be used. For bath temperatures up to approx. 500 °C, two pellets per kg should be used.

Composition: 52% Indium and 48% Tin
Form: Pellets
Melting point: 118 °C
Density: approx. 7.3 g/cm³

This offer includes the indium-tin eutectic in pellet form. It can be a higher-melting alternative to Field’s metal (62 °C), the bismuth-indium eutectic InBi33.7 (72 °C) or BiIn33 (109 °C), as well as lead- and cadmium-containing Wood’s metal.

It is significantly softer and tougher than bismuth-containing alloys.

It can be used in various ways, including as a solder material and for the production of delicate parts and cores.

Composition: 66.3% Indium and 33.7% Bismuth
Form: Pellets
Melting point: 72°C
Density: approx. 8 g/cm³

This offer includes the low-melting indium-bismuth eutectic in pellet form. It is an alternative with a melting point approx. 10 °C higher than Field’s metal (62 °C), InBi33.7 alloys (109 °C), and lead- and cadmium-containing Wood’s metal.

It can be used in various ways, including as a solder material and for the production of delicate parts and cores.

The composition BiIn33 is also eutectic and, with a melting temperature of 109 °C, is the higher-melting eutectic.

Composition: 67% Bismuth and 33% Indium
Form: Pellets
Melting point: 109°C
Density: approx. 8.1 g/cm³

This offer includes the higher-melting bismuth-indium eutectic in pellet form. It is a 47°C higher-melting but more affordable alternative to Field’s Metal (62°C), the alloy InBi33.7 (72°C), and lead- and cadmium-containing “Wood’s Metal”.

It can be used in various ways, including as a soldering material and for manufacturing delicate parts and cores.

The composition InBi33.7 is also eutectic and, with a melting temperature of 72°C, is the lower-melting eutectic.

Composition: 51% In, 32.5% Bi, and 16.5% Sn
Form: Pellets
Melting point: 62°C
Density: 7.9g/cm³

This offer includes the eutectic “Field’s Metal”, composed of Indium, Bismuth, and Tin in pellet form.
Due to its low melting point, it is particularly suitable as a casting alloy and a substitute for lead- and cadmium-containing “Wood’s Metal”. It also serves as solder for glass.

We also offer larger quantities upon request.